ML Update Queries

[Database Administrator]

Hi Gurus,

One of my server is Non-LPAR system and i would like to do ML upgrade
on that system.
When i tried with lsmcode, it gave me two output

Platform Firmware level is 3F030829
System Firmware level is RG030815_d61e10_sfw133

If so which Firmware level do i need to upgrade before ML update?

Steps to do ML upgrade on Standalone:
=============================
1)Check the current Firmware and Download the suitable firmware from
fix central
2)Update the Microcode by /usr/lpp/diagnostics/bin/update_flash –f /
tmp/fwupdate/01SF240_338.rpm
3)Reboot the system
4)Download the suitable ML
5)Check for the pre-requistes
6)Run inutoc . and then install the ML by update_all command
7)Reboot the system

Is there any addition steps needs to followed on doing ML upgrade on
system that are connecting to LPAR?

Thanks
Dheepa

[Database Administrator]

Have a look to

http://www14.software.ibm.com/webapp/set2/flrt/home

to determine the recommended fw level

Dheepa schrieb:
> Hi Gurus,
>
> One of my server is Non-LPAR system and i would like to do ML upgrade
> on that system.
> When i tried with lsmcode, it gave me two output
>
> Platform Firmware level is 3F030829
> System Firmware level is RG030815_d61e10_sfw133
>
> If so which Firmware level do i need to upgrade before ML update?
>
> Steps to do ML upgrade on Standalone:
> =============================
> 1)Check the current Firmware and Download the suitable firmware from
> fix central
> 2)Update the Microcode by /usr/lpp/diagnostics/bin/update_flash –f /
> tmp/fwupdate/01SF240_338.rpm
> 3)Reboot the system
> 4)Download the suitable ML
> 5)Check for the pre-requistes
> 6)Run inutoc . and then install the ML by update_all command
> 7)Reboot the system
>
> Is there any addition steps needs to followed on doing ML upgrade on
> system that are connecting to LPAR?
>
> Thanks
> Dheepa

[HENARRY JAYA]

You can try an alternate way of doing this, by binding text boxes to the appropriate column name of the table and whenever you will click on SAVE it will be updated.
Otherwise u need to create an UPDATE SQL query to specify the updates needs to be done in DB.